Procedimento para análise numérica com software ANSYS de uma viga em flexão com a forma T

Autores

DOI:

https://doi.org/10.5216/reec.v14i1.46511

Resumo

Desenvolvida no Software ANSYS, este trabalho se constitui de uma análise numérica de uma viga de seção na forma de T invertido engastada em uma extremidade e outra sem vinculação, com um momento concentrado aplicado na extremidade livre. O desenvolvimento se deu no âmbito bidimensional com base nos tópicos de ajuda do Software utilizando o modelo VM10. Cada etapa do processo foi descrita em sequência, possibilitando ao leitor replicar e verificar o modelo realizado, além de expor os critérios utilizados. Estão listadas neste trabalho, as operações utilizando a linguagem APDL (ANSYS Parametric Design Language), facilitando a reprodução da análise. Como forma de verificação os resultados obtidos na modelagem numérica foram comparados com uma solução analítica, embasada nas teorias da Resistência dos Materiais. Observou-se que as diferenças entre os resultados no modelo numérico e os encontrados pelo modo analítico são quase nulas, comprovando a confiabilidade do Software ANSYS mostrando-se bastante eficaz para analisar estruturas como as analisadas nesta proposta até as mais complexas.

Abstract

This work presents a numerical analysis carried out in the Software ANSYS of an inverted T-beam clamped at one end and free at the other, with a concentrated moment being applied at the free end. The analysis was two-dimensional and based on the help topics of the Software using the model VM10. Each step of the process was described in sequence and the criteria used were specified, allowing the reader to replicate and verify the model used. This work also lists the operations using the APDL language (ANSYS Parametric Design Language), which facilitates the reproduction of the analysis. As a way of verifying the results found in the numerical modeling, they were compared to an analytical solution based on the theories of Strength of Materials. The differences found between the numerical model results and those of the analytical model are almost null, therefore indicating the reliability of the Software ANSYS which proves itself effective in analyzing structures as the one analyzed in this work or more complex ones.

Downloads

Não há dados estatísticos.

Biografia do Autor

Emerson Cardoso de Castro, Universidade Federal de Ouro Preto (UFOP), Ouro Preto, Minas Gerais, Brasil, emersoncastro@outlook.com

Downloads

Publicado

2017-08-28

Como Citar

CARDOSO DE CASTRO, E. . Procedimento para análise numérica com software ANSYS de uma viga em flexão com a forma T . REEC - Revista Eletrônica de Engenharia Civil, Goiânia, v. 14, n. 1, 2017. DOI: 10.5216/reec.v14i1.46511. Disponível em: https://revistas.ufg.br/reec/article/view/46511. Acesso em: 28 mar. 2024.

Edição

Seção

Notas Técnicas